|
Do not agitate the kegs unnecessarily. If excessive agitation occurs allow kegs to settle for 1 to 2 hours before tapping.
Prior to tapping the keg, ensure that all beer faucets in the serving location are in the off position.
Remove the dust cover (identification cap) from the keg. Check that the keg coupler is in the up (off) position.
Insert the coupler into the valve on top of the keg and turn 1/4 turn clockwise.
To start beer flow, pull out the coupler handle and press downward into the lock (on) position. The keg is now tapped.
Keg in Series
How to Add a Keg in Series
|
|
|
|
